Plot machines

Charging bed

The assembly station. Parts do not power the robot on by themselves.

Charging bed in [πŸŽƒ] Create a Robot Fighter

Charging bed: The assembly station. Parts do not power the robot on by themselves. Get it by On your plot. Used every time you assemble or replace a part. Use it to After every swap, connect the cables and press power before training, waves, or a tournament. If power does not appear, reseat the new part first.

What is Charging bed?

The robot lies down on the charging bed for a head, body, or legs change. Recorded gameplay then shows cables being connected, including yellow and red wires, and a power press before the robot stands up. The official line is 'wire it up and power it on.' There is no published warning banner for a powered-down robot. A powered-down robot missed a tournament entry in that recording.

Published facts

Charging bed facts
FactValue
RoleAssembly

How do you get Charging bed?

On your plot. Used every time you assemble or replace a part.

How do you use Charging bed?

After every swap, connect the cables and press power before training, waves, or a tournament. If power does not appear, reseat the new part first.

FAQ

Charging bed questions

Why does the robot stay down after a part swap?

The charging bed leaves it powered down until you connect the cables and press power.